PRODUCT ARRAY

T&F  manufactures PTFE (Teflon®) insulated wires and cables suitable for both industrial and domestic use as well as for use in electronic devices. Our range of products includes the following: T& F  manufactures PTFE (Teflon®) insulated wires and cables suitable for both industrial and domestic use as well as for use in electronic devices. Our range of products includes the following:

Equipment Wires per MIL-W-16878/BS-2G-210/JSS 51034

The Hook-up/Equipment wires manufactured by T & F Insulations are available in the following categories as per MIL - W -16878D and as per the special requirement of the customer:  ET 250 Volts  E 600 Volts  EE 1000 Volts

Shielded / Unshielded, Round / Flat Multicore Cables

T&F  manufactures a standard line of PTFE insulated multi-conductor signal & control cables designed for extreme environments and rough usage. These are available as cable pairs or singles with optional overall braid shield or metallic foil with drain. This construction is widely used in aerospace and industrial applications requiring high reliability and ultimate physical and electrical performance.

The conductors used are 7 or 19 stranded Silver plated Copper / NPC insulated with 0.010" of PTFE tape, helically wrapped and sintered to homogeneous mass. These are rated as 600V ACRMS working from -65 deg C to +260 deg C as per MIL W-16878 type E or JSS - 51034 with style reference as WH2P-14. The conductors are color coded with a choice of 10 standard colors.

All cores (conductors insulated with PTFE) / pairs are planetary cabled and contra-helically laid for optimum flexibility with a sintered PTFE tape wrap over the bundle.. Shielding is done either by SPC or SS or ABC conductors braided for 90% coverage. Jacketing over the shield is as per the customer's requirement. Jackets available include PTFE tape, PVC and Varnished Fiberglass.

RF Coaxial Cables Per MIL-C-17/JSS 51100

T & F's Co-Axial cables are designed for use in data processing equipment and information systems which require very precise signal characteristics. They may also be used as circuit elements, delay lines or matching impedence devices. All cables are carefully tested to ensure uniform quality and reliable performance. Applications include use in original equipment manufacture; system installations; research and development; quality control and testing equipment.

The central conductor is insulated with PTFE to provide low loss and high dielectric properties in the temperature range of -200 deg C through +200 deg C. This inner dielectric is sometimes called the "core" and serves not only to maintain a common axis but also to separate the 2 conductors. The outer conductor or shield consists of a single layer of woven metal braid. Depending on its use, this braided outer conductor may shield the inner conductor against stray inductance or radiation, or it may serve as a ground return for the interconnected circuit. Wrapped around the outer conductor is an insulated PTFE jacket.

PTFE Sleeves Tubings JSS-54802/MIL-1-22129

The PTFE Sleeves manufactured by T & F are used for applications involving high  temperatures, high frequencies,or both. Sleeving covered by this specification possesses excellent electrical properties, which remain practically constant over a wide ranges of frequency, temperature and humidity, and has a very low loss factor.

Although many wire-ended capacitors and resistors are used on tagboards without sleeving, this is not so when point-to-point wiring is necessary, as in, for example, a miniature I.F strip.In this and like instances, the use of sleeving on bare wire is generally a quick and effective wiring method. It should be borne in mind that there will be space between the sleeving and conductor which is not present with covered wire. Moisture may enter into this space and become trapped, causing subsequent corrosion of the conductor and a lowering of insulation resistance when the sleeved wires touch. In a similar manner large diameter sleeving, when used to hold together a number of covered wires, may form a dangerous moisture trap. In all cases sleevings should be chosen to be as tight a fit as possible on the conductor. use of a suitable lubricant is advised to facilitate insertion of the conductor.

Thermocouple Compensating Cables

For wire and cable construction, conductors with 1, 7, 19, 37 and 133 strands are available as standard sizes. Cables are available as single core, multi-core and multi-pair twisted. These can further be shielded, double shielded or flat woven. The choice of conductors includes Silver Plated Copper, Silver Plated Copper Clad Steel, Nickle Plated Copper and Annealed Bare Copper.

PTFE Insulated wires for Domestic and Industrial Use

Conductors for domestic and industrial use can insulated by PTFE for better life and high temperature use for better reliability ageing effect and Flouro polymer is negligible.

BOPP Insulated wires & cables

High Voltage Corona Resistant (HVCR) Wires & Cables

PTFE Unsintered / Sintered Tape

Polyethylene insulated wires and coaxial cables

In addition to the above, Natural and Bi-colored cables are also available